Konica Minolta bizhub C200 - Manual (Page 85)

C200 5-4
Receiving data (G3/IP/I-FAX) 5
5.2.3 Activity Report
This machine can be set to request from the recipient a reception result for Internet faxes. In addition, if there
was a request from the sender or if the fax was not received correctly, an e-mail message (MDN or DSN) can
be returned to inform the recipient of the reception result for the e-mail message.
!
Detail
To send result notifications, set "Activity Report" in the Network Setting screen of Administrator mode
to "ON". For details, refer to the User’s Guide [Network Administrator].
To request result notifications, the recipient’s machine must be compatible with Full mode.
If the sender's e-mail address in the sent e-mail message is incorrect, a notification will not be returned.
If there is a request from the sender for a result notification, the result notification is sent back.
The result notification is sent back if reception result error code "E6xxxx" appeared.
The receiver's reception result can be checked when Internet faxes are sent. In addition, the reception
capabilities of the receiving device are detected when Internet faxes are sent, and communication can
be performed according to those reception capabilities.
!
Detail
In order to use Full mode function, software switch settings must first be specified. For details, refer to
the User’s Guide [Network Administrator].
The Full mode functions cannot be used if the E-mail transmission is performed.
5.2.4 RX Doc. Header Print
The e-mail message header information can be added to the first page of the received document. This is
useful for viewing the sender information.