Konica Minolta bizhub C200 - Manual (Page 152)

C200 9-18
Administrator Management settings 9
Number of RX Call Rings
Specify the number of rings until the call is automatically answered. (Default: 1)
- The number of rings can be set between 1 and 20.
- If the optional FAX/TEL switch & hand set has been installed, a number between 0 and 20 can be
specified.
2
Note
With software switch settings, the number of rings can be specified for when the hand set is installed.
For details, refer to the User’s Guide [Network Administrator].
9.6.3 Fax Settings - Password Communication (G3)
The function for sending and receiving faxes only if the previously specified password on the sender’s
machine matches that on the recipient’s machine is called "password communication". Specify the
password necessary for password communication.
!
Detail
Specify the password as a two-digit number.
As a factory default, the password is set to "00".
This parameter does not appear if the optional fax kit has not been installed.