Konica Minolta bizhub C200 - Manual (Page 65)

C200 4-23
Transmitting data 4
4.4 Quality settings
Touch [Quality] to specify detailed settings for scanning.
4.4.1 Quality (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)
Quality
Select the type according to the contents of the original. The original type can be selected from the following:
!
Detail
The Quality setting is returned to its default after each transmission.
Even if a high resolution is specified for "Quality", the setting selected for "TX Resolution (Max.)" in the
Scanning Mode screen is given priority.
Text
Select this setting when sending originals containing only text. With this setting, the text is reproduced with
sharp edges, making it easier to read.
Text/Photo
Select this setting for originals consisting of both text and photos (halftones).
!
Detail
Depending on the recipient’s machine, it may not be possible to send faxes with the "Text/Photo"
setting.
If Text/Photo is selected, there may be a decrease in image quality, depending on the recipient’s
machine.
If the "Text/Photo" setting is selected, moiré patterns may appear in some photos. To reduce the
appearance of moiré patterns, select the "Photo" setting.
Photo
Select this setting when sending originals containing only photos (halftones). Halftone photos are reproduced
as well as possible.