4 display settings - default fax screen, Display settings - default fax screen -6, Display settings - default – Konica Minolta bizhub C200 User Manual
Page 116: P. 8-6, Settings

C200
8-6
User Settings / User Management / One-Touch/Box Reg.
8
8.2.4
Display Settings - Default Fax Screen
The screen displayed when the [Fax/Scan] key is pressed can be selected. (Default: One-Touch)
-
One-Touch: The One-Touch screen is displayed.
-
Search: The Search screen is displayed.
-
Direct Input: The Dial screen is displayed.
-
Index: The Index screen is displayed.
!
Detail
If the parameter is set to "Index", the Index screen is given priority when displaying screens for
registering one-touch destinations and programs.
If the optional fax kit has not been installed, the buttons that appear differ as shown below.
[Default Fax Screen]
→ [Default E-Mail Screen]
[Direct Input]
→ [Address Input]
8.2.5
Default Settings - Fax/Scan - Default Scan/Fax Settings
The default settings (settings selected when the machine is turned on or the [Reset] key is pressed) can be
specified.
-
Current Setting: The settings specified before Utility mode was entered are set as the default settings.
-
Factory Default: The settings return to the factory defaults.
Settings can be specified for the following parameters.
-
Quality
-
Resolution
-
Color
-
Density
-
Background Adjustment
-
File Type
-
Zoom
-
Sender
-
TSI Selection
-
2in1
-
Rotation TX
-
Quick Scan TX
-
Stamp
-
2-Sided TX