Konica Minolta bizhub C200 - Manual (Page 78)

C200 4-36
Transmitting data 4
Polling TX - Quality
For the setting procedure, refer to "Quality (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on page 4-23 .
Polling TX - Density
For the setting procedure, refer to "Density (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on page 4-24 .
Polling TX - Reduction/Area
For the setting procedure, refer to "Reduction/Area (G3)" on page 4-25 .
Polling TX - Settings of transmission
The following functions are available. For details, refer to the corresponding pages.
Polling TX - Background Adjustment
For the setting procedure,refer to "Background Adjustment (G3/I-FAX/IP/E-Mail/FTP/SMB/Relay)" on
page 4-27 .
4.5.18 Application - Retrieve (G3)
A document on a bulletin board set up on the sender’s machine can be sent with a command from the
recipient.
Select the method for specifying the sender, and then specify the sender.
2
Note
This function does not appear if the optional fax kit has not been installed.
Function Refer to
Sender p. 4-28
TX-Report p. 4-29
Stamp p. 4-31
2in1 p. 4-29
2-Sided TX p. 4-29
Rotation TX p. 4-30