Konica Minolta bizhub C200 - Manual (Page 24)

C200 1-7
Before using Network Scan/Fax/Network Fax functions 1
IP Address Fax
This function enables fax transmission over an IP network. Specify the destination host name or IP address
to send a fax.
The differences between IP Address fax and G3 fax or Internet fax are as follows.
- The SMTP protocol is used for sending and receiving of the image data.
- Available only within an intranet (enterprise networks).
- Unlike Internet fax, no mail server is required.
IP Relay distribution
The fax is sent through a relay station connected with a LAN.
If a relay station in the intranet is connected to a telephone line, a fax can be sent from any of the machines
connected to the LAN.
The fax machine that issues the relay request and sends the document is called the originating station.
The fax machine that receives the fax from the originating station and sends it on is called the relay station.
Intranet
SMTP
Transmitting a fax by specifying an IP address or host name of the destination.
Originating station
Relay station Terminating station
Intranet
Telephone line