Konica Minolta bizhub C200 - Manual (Page 145)

C200 9-11
Administrator Management settings 9
9.5.2 About Document Management
Settings can be specified for the operation (print, forward or receive in memory) that is performed when a fax
is received.
- As a factory default, the "Print" setting was selected.
- If a remote copy operation is received, it is printed, regardless of the setting.
- The Document Management settings are prioritized in the following order: "F-Code", "reception port"
and "All Other Docs.".
Document type
Documents are divided into the following three categories.
- All Other Docs.: Specify the reception method for documents that were received normally.
- Network/G3-1/G3-2: A different reception method can be specified for each line.
- RX Doc.: A reception user box specifically for documents containing special information, such as F-
codes, can be created, and the reception method can be specified.
2
Note
With software switch settings, sender information can be added when received documents are
forwarded. For details, refer to the User’s Guide [Network Administrator].
[G3-1] and [G3-2] appear only if the optional fax kit has been installed.
9.5.3 Document Management - RX Document - All Other Docs. (G3/IP/I-FAX/Relay/E-
Mail)
Specify the reception method for documents that were received normally.
Password
Register the password necessary for retrieving documents. For confirmation, type in the password again.
2
Note
Any password can be specified. If no password is specified, continue with the next parameter.