Rx doc. settings, Forwarding dest, Remote input check – Konica Minolta bizhub C200 User Manual
Page 150: P. 9-16
C200
9-16
Administrator Management settings
9
RX Doc. Settings
Specify how documents are managed.
-
Print: Select this setting to immediately print the document once it is received.
-
Forward: Select this setting to forward the received document to the specified recipient. A maximum of
210 forwarding destinations can be specified.
-
Print & Forward: Select this setting to immediately print the document once it is received and forward
it to the specified recipient. A maximum of 210 forwarding destinations can be specified.
-
Memory RX: Select this setting to save the received document in the created user box without being
printed.
2
Note
Print documents saved in user boxes from the Doc. tab of the Job List. For details, refer to
display and operations" on page 2-5
Forwarding Dest.
Specify a destination when "RX Doc. Settings" is set to "Forward" or "Print & Forward".
-
To select a new destination, touch [Next Dest.], and then select the destination.
-
To delete a registered destination, select it, and then touch [Delete].
Remote Input Check
If F-codes are used, select whether remote input checking is enabled or disabled.