Konica Minolta bizhub C200 - Manual (Page 42)

C200 3-5
Registration of basic information 3
3.3 Optional settings
Depending on the use, additional settings are also available.
Setting display contents
Set the contents to be displayed when the [Fax/Scan] key or the [Reset] key is pressed on the control panel.
2
Note
For details, refer to "Display Settings - Default Screen" on page 8-5 or "Display Settings - Default
Fax Screen" on page 8-6 .
Relay transmission settings
With IP relay transmissions, this machine can be used as an originating station and as a relay station.
- To use this machine as a relay station, "Gateway TX" must first be set to "Allow".
- To use this machine as an originating station, a routing destination must first be registered with
"Network Settings".
!
Detail
For details on specifying the network settings for IP relay transmissions, refer to the User’s Guide
[Network Administrator].