Rx doc. settings, Forwarding dest, Password – Konica Minolta bizhub C200 User Manual
Page 146: Rx doc. settings -12 forwarding dest -12, P. 9-12
C200
9-12
Administrator Management settings
9
RX Doc. Settings
Specify how received documents are managed.
-
Print: Select this setting to immediately print the document once it is received.
-
Forward: Select this setting to forward the received document to the specified recipient. A maximum of
210 forwarding destinations can be specified.
-
Print & Forward: Select this setting to immediately print the document once it is received and forward
it to the specified recipient. A maximum of 210 forwarding destinations can be specified.
-
Memory RX: Select this setting to save the received document in a All Other Docs. user box without
printing it.
2
Note
Print documents saved in a user boxes from the Doc. tab of the Job List. For details, refer to
display and operations" on page 2-5
Forwarding Dest.
Specify a destination when "RX Doc". Settings is set to "Forward" or "Print & Forward".
-
To select a new destination, touch [Next Dest.], and then select the destination.
-
To delete a registered destination, select it, and then touch [Delete].
9.5.4
Document Management - RX Document - Network (IP/I-FAX)
Specify the operation performed on documents received by Internet faxing or IP address faxing.
Password
Register the password necessary for retrieving documents. For confirmation, type in the password again.