Konica Minolta bizhub C200 - Manual (Page 148)

C200 9-14
Administrator Management settings 9
RX Doc. Settings
Specify how documents are managed after [Yes] is touched.
- Print: Select this setting to immediately print the document once it is received.
- Forward: Select this setting to forward the received document to the specified recipient. A maximum of
210 forwarding destinations can be specified.
- Print & Forward: Select this setting to immediately print the document once it is received and forward
it to the specified recipient. A maximum of 210 forwarding destinations can be specified.
- Memory RX: Select this setting to save the received document in a G3-1 or G3-2 user box without being
printed.
2
Note
Print documents saved in user boxes from the Doc. tab of the Job List. For details, refer to "Job List
display and operations" on page 2-5 .
Forwarding Dest.
Specify a destination when "RX Doc. Settings" is set to "Forward" or "Print & Forward".
- To select a new destination, touch [Next Dest.], and then select the destination.
- To delete a registered destination, select it, and then touch [Delete].
9.5.6 Document Management - RX Document - user box (G3)
A reception user box specifically for documents containing special information, such as F-codes, can be
created, and the reception method can be specified.
First, create the user box. A maximum of 180 user boxes can be created on tabs 0 through 8. Touch the
button of the user box to be specified, and then specify how documents received in the user box are
managed.
2
Note
For details on deleting reception user boxes, refer to "Delete User Box (G3/IP/I-FAX/Relay/E-Mail)"
on page 9-23 .
User boxes can be used only if the optional fax kit has been installed.