Konica Minolta bizhub C200 - Manual (Page 29)

C200 2-5
Control panel/touch panel 2
2.2.2 Job List display and operations
Buttons that can be touched to check the status of jobs appear at the bottom of the screen. Touch [Job List]
to check jobs being performed by the machine, the job history, and received documents.
Job List
Commands for operations such as printing, sending or receiving documents are called "jobs". Touch [Job
List] to display the jobs currently being performed.
Type
To check the transmission/reception status, touch [Type].
- Touch [ ↑] or [↓] to view the status of the transmissions/receptions.
- Touch [RX Doc.] or [TX Doc.] to switch between the document types.
- If [ ] appears, the time for a timer transmission is displayed.
- To delete a document queued for transmission, touch [Delete].
- If [Redial] or [Change Destination] appears, the original can be resent without being scanned again.
(maximum of 5 documents)
- If [Interim Rep.] appears, a transmission progress report can be printed so that the transmission status
can be checked.
The following number of jobs can be displayed.
Indicates that it is time to replace the toner cartridge.
Indicates that it is time to replace the imaging unit.
Indicates that it is time to replace the waste toner box.
Appears when an error occurs with the connection to the POP server.
Indicates that an error occurred during an image stabilization operation, a print operation or a
scan operation.
Contact your service representative
Icon Description