Overseas, F-code, 7 dial - internet fax – Konica Minolta bizhub C200 User Manual
Page 60: Overseas -18 f-code -18, Dial - internet fax -18, Internet fax, P. 4-18
C200
4-18
Transmitting data
4
Overseas
When faxing to a location where transmission conditions are poor, a slower transmission speed can be set
to ensure that the fax can be sent.
!
Detail
This function cannot be used together with the following functions.
Polling TX
Polling RX
Bulletin
F-Code
By entering, for example, a SUB address, the original can be sent to a specific user box on the recipient’s
machine. Transmissions sent with F-codes are called "user box transmissions".
-
F-Code (SUB): Type in the SUB address. This is where the number of the user box used with the user
box transmission is entered.
-
F-Code P/W (SID/PWD): If a password is specified with the user box transmission, type in the
password. For confirmation, type in the password twice.
!
Detail
An F-code transmission can be used only if the recipient’s fax machine supports F-code functions.
If an F-code is specified by directly typing it in, only one transmission with the specified F-code can be
completed per call.
4.3.7
Dial - Internet Fax
From the control panel, type in the e-mail address.
-
Domain: If frequently entered domain names have been registered, the e-mail address can easily be
entered.
-
Scanning Mode: Select the image transmission size and the coding method. For details, refer to
-
Add: Touch this button to specify an additional destination.