9 administrator management settings, 1 initial settings, 1 g3 fax – Konica Minolta bizhub C200 User Manual
Page 136: Self-id, Rx functions, 2 internet fax, Network settings, 3 ip address fax, 4 ip relay, Ip relay dest. selection
C200
9-2
Administrator Management settings
9
9
Administrator Management settings
9.1
Initial settings
9.1.1
G3 Fax
Before performing G3 fax operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page 9-17
RX Functions
Refer to
"Fax Settings - RX Functions (G3)" on page 9-17
.
9.1.2
Internet Fax
Before performing Internet fax operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page 9-17
Network Settings
2
Note
For details, refer to the User’s Guide [Network Administrator].
9.1.3
IP Address Fax
Before performing IP address fax operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page 9-17
Network Settings
2
Note
For details, refer to the User’s Guide [Network Administrator].
9.1.4
IP Relay
Before performing IP relay operations, specify settings for the following parameters.
Self-ID
Refer to
"Fax Settings - Self-ID (G3/Relay)" on page 9-17
IP Relay Dest. Selection
Refer to
"Default Settings - Fax/Scan - IP Relay Dest. Selection" on page 8-7
Network Settings
2
Note
For details, refer to the User’s Guide [Network Administrator].