Konica Minolta bizhub C350 - Manual (Page 76)

3 3.3 User Box function
3-18 bizhub C350
Us
er
O
per
ati
o
n
s
Chap
ter
3
“ADMIN” and “BOXLIST” cannot be used as User Box names.
If an incorrect User Box name is entered, the message “User Box Name is
incorrect.” appears. Click the [OK] button, and then type in a correct User
Box name.
If the entered User Box name has already been registered, the message
“The Box could not be changed.” appears. Click the [OK] button, and then
type in a different User Box name.
If the User Box is being accessed by a different user, the message “The Box
could not be changed.” appears. Click the [OK] button, and then try
changing the User Box name again after waiting a while.
If the currently specified password that was entered is incorrect, the
message “Password incorrect.” appears. Click the [OK] button, and then
type in the correct password.
If the Unauthorized Access Lock function is set to “Enable”, incorrectly
entering the current password is counted as a failed authentication attempt.
If the password is incorrectly entered three times, the entered password
becomes invalid after the fourth failed authentication attempt. (The
password can no longer be authenticated even if the correct password is
entered.) To again allow access, the Access Lock Release function in
Admin. Mode must be performed. Contact the Administrator to perform the
Access Lock Release function.
After finishing with the User Box or if the computer must be left alone while
the User Box is accessed, be sure to log out from the User Box or quit
PageScope Web Connection.