Konica Minolta bizhub C350 - Manual (Page 54)

2 2.11 Administrator BOX Utility Operations
2-44 bizhub C350
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
6 Click the [Start] button.
Backup begins and, when it is finished, the message “Backup successfully
completed.” appears. Click the [OK] button.
✎
Note
If the entered password (Administrator Code) was incorrect, the message
“Unable to login on MFP controller.” appears. Click the [OK] button, and then
type in the correct password (Administrator Code).
If the Unauthorized Access Lock function is set to “Enable”, incorrectly
entering the password (Administrator Code) is counted as a failed
authentication attempt. If the password (Administrator Code) is incorrectly
entered three times, the message “Access denied due to unauthorized
access.” appears after the fourth failed authentication attempt, and the
password (Administrator Code) can no longer be entered. To again allow
access, turn the machine off, then on again.
If Admin. Mode is already logged on, the message “Login failed.” Click the
[OK] button, and then try logging on to Admin. Mode again after waiting a
while.
If a User Box is being accessed by a user, the message “Login failed.”
appears. Click the [OK] button, and then try logging on to Admin. Mode
again after waiting a while.
Make sure that none of the general users of the machine will know the
Password (Administrator Code).
If the computer is left alone while the backup operation is being performed
in Admin. Mode, settings may be changed without permission. After finishing
the backup operation or if the computer must be left alone while the backup
operation is being performed, be sure to quit the backup operation or quit
BOX Utility.
If no folder is specified in the “Saving Folder” box in step 5, the message
“Directory does not exist. Do you want to create?” appears. Click the [OK]
button to create a new folder.
During the backup operation, a new folder is created under the specified
folder. The folder name is automatically assigned according to the
registration name, year/month/day, and time.
You cannot use the Machine control panel while the backup operation is in
progress. After the backup operation is complete, the control panel is
unlocked.