Konica Minolta bizhub C350 - Manual (Page 32)

2 2.5 HDD Lock function
2-22 bizhub C350
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
5 Using the 10-Key Pad, type in the currently specified 8-digit password, and then
touch [Enter].
❍ To display the screen for typing in uppercase letters, touch [CAPS].
❍ To delete the last character entered, touch [Del.].
❍ To return to the screen shown in step 3, touch [Cancel].
✎
Note
If the password was incorrectly entered, the message “The retyped
password is incorrect. Input password again.” appears. Be sure to type in
the correct password.
6 Check that the message “Note : Please turn the main switch of the copier OFF/
ON to activate HDD Lock.” appears, and then turn the machine off, then on
again.
✎
Note
If the machine is left alone with the Admin. Mode screen displayed, the
Admin. Mode functions may be changed without permission. After using the
Admin. Mode functions or if the machine must be left alone while the Admin.
Mode functions are being set, be sure to return to the Basic screen.