Konica Minolta bizhub C350 - Manual (Page 21)

2.4 Reprint function 2
bizhub C350 2-11
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
2.4 Reprint function
When access to Admin. Mode is authenticated, use of the Reprint function can be
set to either “Yes” or “No”. The default setting is “Yes”.
If the Reprint function is set to “Yes”, printed jobs can be recalled and printed again.
A maximum of 49 jobs can be saved, and when there are more than 49 jobs or when
the memory becomes full, jobs are deleted, starting from the oldest. Deleted jobs
cannot be recalled.
If the Reprint function is set to “No”, no scanned data will remain in the machine’s
memory.
Setting the Reprint Function
1 Call the Admin. Mode to the screen from the control panel.
❍ For the procedure to be followed when calling the Admin. Mode to the
screen, see “Accessing the Admin. Mode” on page 2-2.
2 Touch [Admin. Set].
3 Touch [3/4], and then touch
[Reprint].