Konica Minolta bizhub C350 - Manual (Page 47)

2.8 User Box Management Operations 2
bizhub C350 2-37
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
✎
Note
The Administrator should change the User Box password only if the user of
the User Box has forgotten the password. However, the User Box users and
passwords should be managed by the Administrator, and the password
should be changed only after the User Box user has been appropriately
confirmed.
When typing in the User Box password, specify a password (alphanumeric
characters and symbols) that is 4 or more digits long. (A password of less
than 4 digits cannot be set. Be sure to specify a password of 4 or more
digits.)
If the new password is entered incorrectly, the message “New password is
incorrect.” appears. Click the [OK] button, and then type in a correct
password.
If the password entered for the second time does not match the new
password, the message “Retyped password does not match.” appears.
Click the [OK] button, and then type in the correct password for confirmation.
If the computer is left alone with the Admin. Mode screen displayed, the
Admin. Mode functions may be changed without permission. After using the
Admin. Mode functions or if the computer must be left alone while the Admin.
Mode functions are being set, be sure to log off from Admin. Mode or quit
PageScope Web Connection.
5 Click the [Log-out] button to log off from the Admin. Mode.