Konica Minolta bizhub C350 - Manual (Page 16)

2 2.1 Admin. Mode authentication function
2-6 bizhub C350
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
Make sure that none of the general users of the machine will know the
Administrator Code.
If PageScope Web Connection is being used to log on to Admin. Mode, no
operation can be performed from the machine’s control panel. In addition, if
an Administrator is already logged on to Admin. Mode, the message
“Another administrator is logged-in.” appears, and Admin. Mode can no
longer be logged on from either the machine’s control panel or from
PageScope Web Connection.
If the Panel Reset Timer function is set and no operation is performed (for
five minutes when set between 1 and 5 minutes or for the set length of time
when set between 6 and 9 minutes), access to Admin. Mode automatically
times out. In addition, if the function was set to “No”, access to Admin. Mode
automatically times out if no operation is performed for ten minutes. When
the machine is used again, the message “Administrator mode has logged-
out because of time out.” appears. Click the [OK] button, and then log on to
Admin. Mode again.
If you try to log on to Admin. Mode while a job is being performed, the
message “Login failed.” appears. Click the [OK] button, and then try logging
on to Admin. Mode after the job is finished.
If Admin. Mode was logged on while the BOX Utility is being used to backup
or restore, the message “Login failed.” appears. Click the [OK] button, and
then try logging on to Admin. Mode again after waiting a while.
If the computer is left alone with the Admin. Mode screen displayed, the
Admin. Mode functions may be changed without permission. After using the
Admin. Mode functions or if the computer must be left alone while the Admin.
Mode functions are being set, be sure to log off from Admin. Mode or quit
PageScope Web Connection.
6 Click the [Log-out] button to log off from the Admin. Mode.
✎
Note
If the Web browser is closed without clicking the [Log-out] button while the
Administrator Settings screen of PageScope Web Connection is displayed,
the touch panel of the machine is not unlocked until ten minutes have
passed.