Konica Minolta bizhub C350 - Manual (Page 37)

2.7 Panel Reset Timer function 2
bizhub C350 2-27
A
d
mi
ni
st
ra
to
r O
p
er
at
io
n
s
Ch
apte
r 2
Setting the Panel Reset Timer Function
1 Call the Admin. Mode to the screen from the control panel.
❍ For the procedure to be followed when calling the Admin. Mode to the
screen, see “Accessing the Admin. Mode” on page 2-2.
2 Touch [Admin. Set.].
3 Touch [4/4], and then touch
[Panel Reset Timer].
4 Using the 10-Key Pad, type
in the length of time
(between 1 and 9 minutes)
until the panel should be
reset.
❍ The Panel Reset Timer
function can be set
between 1 and 9
minutes, in 1-minute
intervals.
❍ To set the Panel Reset Timer function so that it is not used, touch [No].
❍ Press the [C] key to clear all characters.
5 Touch [Enter].