Avaya 555-233-116 User Manual
Page 64

Data modules and asynchronous data units
555-233-116
64
Issue 4 October 2002
6. The SET 19200 SPEED? prompt appears. Press the NEXT/NO button.
7. If you selected the AT-command interface in the section
, you are finished configuring the 7400A data
module.
Setting the automatic-answer feature on 7400A DCE
You can set up the 7400A data module to automatically answer calls or you can
have it ignore calls until an operator answers manually. Set up the data module for
automatic answering unless specifically directed to otherwise.
1. When the SET ANSWER? prompt appears, press the ENTER/YES button.
2. When the ANS = AUTO? prompt appears, if you want to enable automatic
answering, press the ENTER/YES button. Otherwise, press the NEXT/NO
button.
3. If you pressed NEXT/NO in the preceding step, the ANS —> MANUAL?
prompt appears. If you want to disable automatic answering, press the
ENTER/YES button. Otherwise, press the NEXT/NO button.
SET 19200 SPEED?
DATA
NEXT/NO
BACK
ENTER/YES
●
➜ ●
❍
❍
Push the button indicated by the arrow (
➜
)
SET ANSWER?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
➜ ●
Push the button indicated by the arrow (
➜
)
ANS = AUTO?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
❍
Select an option (NEXT/NO or ENTER/YES)
ANS —> MANUAL?
DATA
NEXT/NO
BACK
ENTER/YES
●
❍
❍
❍
Select an option (NEXT/NO or ENTER/YES)