Avaya 555-233-116 - Manual (Page 128)

Terminal server installation
555-233-116 128 Issue 4 October 2002
Administering the gateway
NOTE:
If the C-LAN circuit pack and IOLAN+ are in the same subnet, skip this step.
1. Select Admin mode > Password and press ENTER .
2. Type iolan and press ENTER .
3. Select gateway to access the Gateway menu
4. Fill in the following fields for Entry 1:
■
Destination: C-LAN IP address
■
Gateway: Gateway address
■
Netmask: Subnet mask
NOTE:
The following steps re-initialize the IOLAN+ so it knows it’s connected
to the LAN through your gateway.
5. Select reboot and press ENTER .
6. Press the space bar to restart the IOLAN+.
Administering an IOLAN+ port
Use this procedure when connecting an adjunct or serial COM port on a PC
directly (locally) to the IOLAN+ (see
Figure 23 ).
1. Select Admin mode > Password and press ENTER .
2. Type iolan and press ENTER .
3. Select port and press ENTER .
4. Type port number, where port number is the port that the adjunct
connects to, and press ENTER to view the Port Setup Menu.