Avaya 555-233-116 - Manual (Page 133)

Administering IP services
Issue 4 October 2002 133 555-233-116
4. The Local Port field defaults to 0 for all client applications. You cannot
make an entry in this field.
5. In the Remote Node field, enter the node name for the adjunct, as
administered on the Node Names screen. For the call accounting
application, type callacctg. Since the PMS application routes through the
terminal server, termserver is the remote node for this service type.
6. In the Remote Port field, enter the TCP listen port assigned to the
adjunct. The recommended value for CDR1 is 5101, and the
recommended value for PMS is 5103.
NOTE:
This number must match the port administered on the end device. If
you are using the Downloadable Reliable Session-Layer Protocol
tool, this must match the port administered in the Server application.
If you are using a terminal server, this number must match the
Local
Port number on the Port Setup menu. Consult the documentation
for your Call Accounting system to determine the appropriate port for
the CDR device.
7. Move to Page 3. Type y in the Reliable Protocol field for the CDR
Service Type.
8. Press ENTER to save your changes.
change ip-services Page 3 of 3
SESSION LAYER TIMERS
Service Reliable Packet Resp Session Connect SPDU Connectivity
Type Protocol Timer Message Cntr Cntr Timer
CDR1 y 3 1 1 1