Norgren Prospector Series Datasheets - Manual (Page 55)

Prospector Series Poppet Valves
All Dimensions in Inches (mm)
Littleton, CO USA Phone: 303-794-2611 www.norgren.com VAL-12-55
Technical Data
Fluid: Compressed air
Maximum Pressure: 300 psig (20.4 bar)
Temperature Range: -20° to 175°F* (-29° to 79°C).
*With a dew point of supply air less than air temperature below 35°F (2°C).
Maximum Diameter of Lock Shackle: 5/16" (8mm)
Materials of Construction
Valve Body: Aliminum
Muffler Base: Zinc
Spool, T-Handle, Muffler Shell: Aluminum
Spring Detent: Stainless Steel
Elastomers
Standard: Nitrile and Polyurethane
Optional: Fluorocarbon
Repair Kits
C0021A/D and C0023A/D Valves:
Standard Elastomers: 53474-43
Fluorocarbon Elastomers:
53474-44
C0022A/D and C0024A/D Valves:
Standard Elastomers: 53475-34
Fluorocarbon Elastomers: 53475-36
Replacement Mufflers* for C0021A/C0024D Valves
C0021A/D and C0023A/D Valves: ML004F
C0022A/D and C0024A/D Valves: ML008F
* Contains all bolts and washers required to flange mount with the respective sized lockout valve.
Lockout Hasp
Part Number: 54547-01
The 1-1/2" diameter jaws can be used with all Norgren Inline, Olympian, and
Poppet Lockout Valves except the T15. High-tensile steel affords extra protection
against unauthorized access. Red vinyl coated and plated to resist rust. Locking
holes accommodate padlocks up to 11/32" shackle diameter.
OP
EN
CLOSE
A
D
F
E
C
B
OP
EN
CLOSE
D
C
B
B C D
Without With Without With Without With
Valve Type A Muffler Muffler Muffler Muffler Muffler Muffler E F
All 1.87 9.33 11.78 2.90 5.35 6.97 7.97 4.00 2.00
1/2" basic (48) (237) (299) (74) (136) (177) (202) (102) (51)
All 2.26 12.07 15.72 4.13 7.78 8.65 10.46 5.00 2.50
1" basic (57) (307) (399) (105) (198) (220) (266) (127) (64)
Lockout Hasp
54547-01