WIKA CPG2500 - Manual (Page 6)

6 Mensor/WIKA Operating Instructions Series CPG 2500
Digital Pressure Gauge
SERIES CPG 2500
8.2.3 Specifications 66
8.3 Analog Output 66
8.3.1 Command Set for Analog Output Option 67
8.3.2 Zero and Span Adjustment 68
8.3.3 Specifications 69
8.4 IEEE-488 (GPIB) (see 7.1.4) 70
8.5 Rack Mount Kit (optional accessory) 70
9. Maintenance 71
9.1 Beyond the Warranty 71
9.2 Spare Parts 72
9.3 Replacing the fuse 72
10. Calibration 73
10.1 Environment 73
10.2 Pressure Standards 73
10.3 Calibration Medium 73
10.4 Setup 74
10.5 Calibration Process 75
10.5.1 Sensor Tab 76
10.5.2 Utility Tab 76
10.5.2.1 Zero and Head Correction 76
10.5.2.2 Restore Factory Cal 77
10.5.2.3 Change Password 77
10.5.2.4 Date of Calibration 77
10.5.3 Edit Tab 78
10.5.4 Calibrate Tab 78
10.5.4.1 Procedure 1: ‘As found’ Data 79
10.5.4.2 Procedure 2: Active Calibration 79
11. Appendix 81
11.1 Measurement Units 81
11.2 Conversion Factors, psi 82
11.3 Conversion Factors, millitorr 84
11.4 Conversion Factors, pascal 85