WIKA CPG2500 User Manual
Page 39
Mensor/WIKA Operating Instructions Series CPG 2500
39
Digital Pressure Gauge
SERIES CPG 2500
3.
Queries are special instructions in the form: [Command?] [Termination] where the
question mark, “?”, immediately precedes the terminator.
When a valid query is received, the CPG 2500 will return {data} terminated by CR and
LF. Floating point data is returned in the current engineering units in exponential format.
7.1.3.4 Output Formats
Pressure readings are returned in exponential notation in a format according to the
OUTFORM command as follows. Outform applies to both pressure channels.
1.
2.
3.
4.
7.1.3.5 Commands and Queries
Table 7.1.3.5 lists all of the current CPG 2500 commands and queries.
i
Notice
Channel specific commands are sent to only the active channel.
See ‘CHAN’ command.
Optional emulation modes are available in which a CPG 2500 can emulate remote func-
tions of different brands of pressure gauges. Please contact Mensor for more details.
Table 7.1.3.5 - CPG 2500 Commands and Queries
Command or
Query
Data
Response/Function
?
none
Returns data per the current output form.
ACQUIRE?
15 char string.
Example:
Acquire? Test_stand_1
Returns:
CCC
This command is used when multiple
computers would like to control the instru-
ment. Yes if acquisition is successful. No if
instrument is being controlled with another
computer. CCC... = name of controlling
computer. See: RELEASE? and UNLOCK
ADDRESS
0-31
Sets the GPIB Address
ADDRESS?
Returns the GPIB Address.