WIKA CPG2500 User Manual
Page 18
18
Mensor/WIKA Operating Instructions Series CPG 2500
Digital Pressure Gauge
SERIES CPG 2500
Pressure
media
Clean, dry, non-corrosive, non-conbustible, non-oxidizing
gases. Not suitable for oxygen use
Display
6.2” color LCD with 4 wire resistive touch screen
Resolution
digits
6 significant digits (up to 1 ppm); user selectable.
Warmup time
min
Approximately 15 minutes to achieve full accuracy depending
on environment.
Remote user
interfaces
Standard: RS-232 and Ethernet
Optional: IEEE-488 and Analog Output
Power input
requirements
+5 VDC, 3 A min.
Fuses: Littelfuse® 0454 002
Operating
temp range
°C
0° ... 50
Note: This is not the compensated temperature range.
Storage
temp range
°C
0° ... 70.
Minimal vibration. Non-condensing humidity.
Orientation
effects
Negligible, can be removed with re-zeroing.
Weight
lbs.
<5
Dimensions
in.
(cm)
8.37” wide x 3.47” high x 9.00” deep (21.26 cm x 8.81 cm x
22.86 cm).
Half rack width x 2U x 9” deep.
Feet: .96 wide x .60” high x 3.10” deep (2.44 cm x 1.52 cm x
7.87 cm).
Compliance
The CPG 2500 is compliant to:
EN 61326-1:1997
EN 61326-1:A1:1998
EN 61326-1:A2:2000
EN 61000-3-2:2000
EN 61000-3-3:1995
Reading rate
50ms, 20 readings per second
Operating
environment
5 to 95% RH non-condensing
Options
Optional Output: Barometric Reference Transducer, Barom-
eter, IEEE-488 GPIB Interface, Analog Output.
Optional Accessories: Rack Mount Kit