WIKA CPG2500 - Manual (Page 52)

52 Mensor/WIKA Operating Instructions Series CPG 2500
Digital Pressure Gauge
SERIES CPG 2500
UNITS_TABLE not emulated
UNITS_TABLE? UNITS_TABLE? lf not emulated
WINDOW window sp
lf Sets the filter window for pressure readings where
is a value in the current measurement
units within the range of the instrument.
WINDOW? window?lf Returns the filter window setting for the pressure
reading.
The instrument returns where
is a value in the current units within the
range of the instrument.
ZERO zero sp lf This command requires that the PWZ or the PW
password must be issued before the first occur-
rence of the zero command. The zero command
sets the DPG zero offset to in the current
units where is a value between +/- 17 psi.
ZERO? ZERO?lf Returns the current zero calibration offset where
is current zero value in current measure-
ment units.
7.1.3.8.2 UNITS Command Syntax for DPG 2100 Measurement Units
Table 7.1.3.8.2 - UNITS Command Syntax for DPG 2100 Measurement Units
N Description Output Format Type
1 pounds per square inch PSI English
2 inches of mercury @ 0°C INHG English
3 inches of mercury @ 60°F INHG English
4 inches of water @ 4°C INH2O English
5 inches of water @ 20°C INH2O English
6 inches of water @ 60°F INH2O English
7 feet of water @ 4°C FTH2O English
8 feet of water @ 20°C FTH2O English