WIKA CPG2500 - Manual (Page 19)

Mensor/WIKA Operating Instructions Series CPG 2500 19
Digital Pressure Gauge
SERIES CPG 2500
5. Installation
5.1 Unpacking the Instrument
In addition to functional testing, each unit is inspected for appearance prior to leaving
the factory. Upon receipt, please examine the transducer for shipping damage. Report
any apparent damage to the carrier immediately.
In addition to this manual you should have:
• CPG 2500 Digital Pressure Gauge;
• Power Supply;
• 1/8 inch FNPT fitting adapters;
• Any accessories ordered;
• An envelope containing the Calibration Certificate.
5.2 Dimensions
5.3 Mounting
The instrument can be set up on a table top or it can be rack-mounted. Rack mount
adapters are optional on the CPG 2500 (see Section 8, Options).
The special sensors used in the CPG 2500 are relatively insensitive to tilt and vibration.
However to further assure stability and accuracy, avoid mounting the instrument on
surfaces subject to excessive motor or machinery vibration.