WIKA CPG2500 - Manual (Page 41)

Mensor/WIKA Operating Instructions Series CPG 2500 41
Digital Pressure Gauge
SERIES CPG 2500
DOC mm/dd/yyyy Sets the date of cal for the active channel.
DOC? mmddyy Returns the date of cal for the active chan-
nel.
DOM? mm/dd/yyyy Returns the date of manufacture.
FILTER Off, Low, Normal, High Sets the reading filter 0, 80%, 92%, 95%.
FILTER? (filter) Returns the reading filter.
GASDENSITY Value in lb/cuft Sets the head pressure gas density.
GASDENSITY? n.nnnnne+nn Gets the head pressure gas density.
GASTEMP Value in degrees F Sets the head pressure gas temperature.
GASTEMP? n.nnnnne+nn Gets the head pressure gas temperature.
GATEWAY nnn.nnn.nnn.nnn Sets the Ethernet gateway address.
GATEWAY? nnn.nnn.nnn.nnn
Gets the Ethernet gateway address.
HEIGHT Value in inches Sets the head pressure height.
HEIGHT? n.nnnnne+nn Gets the head pressure height.
ID? MENSOR, 2500,
ssssss,v.v.vv Ssssss is the serial number, v.v.vv is the
CPG 2500 software version.
IP nnn.nnn.nnn.nnn Sets the IP address of the instrument.
IP? nnn.nnn.nnn.nnn
Returns the IP address of the instrument.
KEYLOCK yes or no Locks or unlocks keyboard.
KEYLOCK? (yes or no) Returns yes or no.
LISTRANGE? PRI,1, min,max Returns the range of the installed sensor
for the active channel.
LOCALGRAVITY value in ft/s^2 Sets the local gravity in feet/sec^2.
LOCALGRAVITY? n.nnnnne+nn Returns the local gravity in feet/sec^2.
NETMASK nn.nnn.nnn.nnn Sets the Ethernet network mask.
NETMASK? nnn.nnn.nnn.nnn
Gets the Ethernet network mask.
OUTFORM 1 to 4 - (see Table 7.1.3.6) Sets the output format.
OUTFORM? X Returns the output format (see 7.1.3.4).