SawStop 3.0HP - Manual (Page 5)

SawStop 10” Professional Cabinet Saw 3
Table of Contents
Using Your Saw 40
Adjusting the Blade Height 40
Adjusting the Blade Tilt Angle 40
Turning on Main Power and Starting the Motor 41
System Status Codes 43
Using the Blade Guard 46
Using the Riving Knife 49
Using the Miter Gauge 49
Cross-Cutting 51
Using a Fence 52
Rip Cutting 53
Using the Saw in Bypass Mode 56
Using a Mobile Base 57
Changing the Brake Cartridge 58
Installing a Brake Cartridge 61
What to do if the SawStop® Safety System Activates 62
Making Adjustments to Your Saw 63
Aligning the Table 63
Aligning the Blade to the Tilt Axis 67
Aligning the Blade Elevation Assembly 70
Adjusting the Elevation Limit Stops 72
Adjusting the Tilt Limit Stops and Tilt Angle Indicator 73
Adjusting the Table Insert 75
Aligning the Riving Knife and Spreader to the Blade 77
Adjusting the Height of the Limit Rod Wood Stop 80
Adjusting the Quick-Release Clamp 82
Adjusting the Miter Gauge 83
Adjusting the Motor Belt Tension 84
Adjusting the Tilt Gearing 84
Adjusting the Elevation Gearing 85