SawStop 3.0HP - Manual (Page 36)

34 SawStop 10” Professional Cabinet Saw
Fig. 51 Fi Fi Fi Fi Fi Fi Fi g g g g g 5 5 5 5 5 5 5 1 1 1 1 1 1 1
Preparing Your Saw for Use
WARNING! Some types of dust created by sawing, power sanding, grinding, drilling, and other construction activities contain
chemicals known to cause cancer, birth defects or other reproductive toxicity or harm. Some examples of these chemicals are lead
from lead-based paints, crystalline silica from bricks, cement, and other masonry products, and arsenic and chromium from chemically
treated lumber. In addition, wood dust has been listed as a known human carcinogen by the U.S. government. The risk from exposure to
these chemicals and to dust varies depending on how often you do this type of work. To reduce your exposure, work in a well ventilated
area and work with approved safety equipment including dust masks or respirators designed to fi lter out such dust and chemicals.
Dust Collection
Your SawStop ® Professional Cabinet Saw includes a dust shroud around the blade to provide superior dust
collection to ordinary saws. A fl exible hose connects the dust shroud to a dust port that mounts to the back of
the cabinet (see Fig. 39 on page 27). Connect a suitable dust collection system to the dust port and always use
the dust collection system when making a cut.
SawStop recommends the use of a dust collection system that provides at least 350 CFM of fl ow at the dust
port. Attach a 4 inch diameter fl exible hose between the inlet port on your dust collector and the dust port at the
back of the cabinet (see Fig. 51). If you power your dust collector and SawStop
® saw from the same electrical
circuit, ensure the circuit and breaker have suffi cient capacity for both machines.
For more information on dust control and installing a dust collection system, see Woodshop Dust Control, by
Sandor Nagyszalanczy, The Taunton Press, 2002.
Preparing Your Saw for Use
connect your dust
collection system
to the 4” port