SawStop 3.0HP - Manual (Page 17)

SawStop 10” Professional Cabinet Saw 15
use the table and the
elevation control shaft
as lifting points to help
roll the saw
lift under the rear
edge of the table
Fig. 3
Standing Up Your Saw
both overhang the edges of the Styrofoam (see Fig.
2b).
3. With the help of another person,
carefully roll the saw off the
pallet and onto the top piece of
Styrofoam, as shown in Fig. 3.
You can use the cast iron table
and the elevation control shaft
as lifting points to help you roll
the saw. Wear safety gloves
and be careful to use proper
lifting technique to avoid injury.
Fig. 4
If you have a Professional Cabinet Saw Mobile Base ...
install it now while the saw is on its side. Refer to the manual that comes with your Professional Cabinet Saw
Mobile Base for instructions. Once the mobile base is installed, continue with step 4 to stand up your saw.