beautypg.com

Rugged Ridge PowerTop Kit, 07-14 Jeep Wrangler Unlimited (JK), Black User Manual

Page 41

background image

SECTION - I - Adjusting the Limit Switches and Attaching the Rear Guards

Section I

Page 39

©2012

Section Description- This section will illustrate how to adjust the limit switches and how to attach

the rear guards.

Tool Needed -

Phillips head screwdriver

Wrench (1/4”)

Hardware Kit - #7

Carefully read and understand all instructions before proceeding.

NOTICE

Adjust the rear limit switch so the power top shuts off

when it is cycled up and closed. Tighten fasteners once

adjusted.

2

Adjust the front limit switch so the power top shuts off

when the top is cycled down and open. Tighten

fasteners once adjusted.

3

1

Test the Power Top to confirm that it is working correctly.

Please refer to the operational checklist found on

page 3.

Hold down the brake then press the

left side of the

switch to open the top. Press the

right side of the

switch to close the top.

Please refer to page 1-2 for further information on safety.

WARNING

!

!

Entanglement & Pinch Hazards