Rugged Ridge Euro Style Turn Signal & Side Marker Guard,07-14 Jeep Wrangler (JK) User Manual
Rugged Ridge For the car
2007-08 Wrangler
Side Marker Light Euro-Guard
11231.11 - Black Powdercoated
11142.11 - Stainless Steel
Page 1
Rugged Ridge - Outland Automotive and OMIX - ADA (the company) warrants to the original purchaser of this product that should the product or any
part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 DAYS from the date of original purchase, such
defect(s) will be repaired or replaced or credited at the Company’s sole option.
To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e.g. Dated bill of sale),
specification of defect(s) to the place of purchase or, with prior approval from the Company (Return Authorization Number is required), freight pre-paid
to the Company address listed below.
This warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration,
improper installation, mishandling, misuse, neglect, accident or by acts of nature. THE EXTENT OF THE COMPANY’S LIABILITY UNDER THIS
WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY
EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF
MERHCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR BREACH OF ANY
WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN THE PERIOD OF
90 DAYS FROM DATE OF ORIGINAL PURCHASE.
IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability
other than expressed herein in connection with the sale of this product.
Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage, so the
above limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
LIMITED 90 DAY WARRANTY
Applies to Rugged Ridge - Outland Automotive by Omix-Ada Inc. Products
Omix-Ada Inc.
460 Horizon Dr. Suite 400
Suwanee, Georgia 30024
Step 1.
Begin by removing the bulb
and socket assembly from the marker
light. Twist the socket up and away
from the vehicle until it loosens.
Step 2.
With the bulb removed,
locate the two housing retaining tabs
(circled) and pry them outwards,
releasing the housing.
Step 3.
The housing may now be
removed from the front of the vehicle.
Step 4.
Align the 3 metal tabs with the 3
housing tabs (they are spaced uniquely and
only go on one
way). Slide the
bottom guard tab
over the housing
until it clears the
lens (use the lens
stamping letters to
determine bottom).
Step 5.
Slide the remaining
guard tabs onto the housing. The
fit will be tight.
Step 6.
With the guard seated
onto the housing, squeeze the
guard tabs tightly for a snug fit.
Step 7.
Re-insert the housing into
the grille. Push the housing back until
it snaps into place.
Step 8.
Reinstall the bulb/socket
assembly, remembering to rotate it to
secure it to the housing.
Step 9.
Installation is now complete!