Agilent Technologies VXI E1439 - Manual (Page 183)

173
Agilent E1439 Programmer's Reference
Functions listed alphabetically
age1439_smb_clock_output
Specifies which clock to output from the SMB clock connectors. This description also includes
the query function:
age1439_smb_clock_output_get
VXIplug&play Syntax
#include "age1439".h
ViStatus age1439_smb_clock_output(ViSession id, ViInt16 smbClock);
ViStatus age1439_smb_clock_output_get(ViSession id, ViPInt16 smbclockPtr);
Note
This command should be used only for specialized custom clock requirements. Most useful clock
setups can be supplied by
age1439_clock_setup .
Description
This function selects the source of the output for the front panel SMB clock connectors.
Parameters
id is the VXI instrument session pointer returned by the age1439_init function.
smbClock AGE1439_BNC_CLOCK specifies that the BNC input be output from the SMB clock
connectors.
AGE1439_CLOCK_OFF specifies no output from the SMB clock connectors.
AGE1439_DIVIDED_ADC_CLOCK specifies that the divided ADC clock be output from the
SMB clock connectors.
AGE1439_VXI_CLOCK specifies that the VXI clock be output from the SMB clock connectors.
smbClockPtr Returns a pointer to the current value of smbClock.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
“age1439_error_message” on
page 102 .
See Also
“Default values” on page 201 , “age1439_init” on page 132 , “age1439_clock_setup” on page 78 ,
“age1439_front_panel_clock_input” on page 131 , “Using clock and sync” in chapter 3