Agilent Technologies VXI E1439 - Manual (Page 181)

171
Agilent E1439 Programmer's Reference
Functions listed alphabetically
Note
The required completion time for self-test is up to 25 seconds depending on the amount of
memory in the module.
Note
Calling this function halts any measurement or fiber transfer.
Return Value
AGE1439_SUCCESS indicates that a function was successful.
Values other than AGE1439_SUCCESS indicate an error condition or other important status
condition. To determine the error message, pass the return value to
“age1439_error_message” on
page 102 .
See Also
“Commands which halt active measurements” on page 198 , “age1439_init” on page 132
AGE1439_ST_ANALOG_FAIL 0x100 analog test failed
AGE1439_ST_FIBER_FAIL 0x200 fiber test failed
AGE1439_ST_EXECUTION_ERR 0x4000 self-test execution error
Error
Message
Error Code
(hex)
Self Test
Status Message