HID FARGO HDP8500 User Guide - Manual (Page 3)

© 2012 HID Global Corporation. All rights reserved.
3
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Printer Driver Installation Procedures _________________________________________________________ 54
Section 4: Printer Driver Operations _________________________________________________ 55
Using the Card tab ________________________________________________________________________ 55
Selecting the Card Size ___________________________________________________________________ 56
Selecting the Card Type __________________________________________________________________ 57
Printing on Alternate Card Stocks __________________________________________________________ 59
Conducting the Tape Adhesion Test ________________________________________________________ 60
Using the Card Hopper Selection __________________________________________________________ 62
Setting the Orientation __________________________________________________________________ 63
Specifying the number of Copies __________________________________________________________ 64
Selecting the Diagnostics button ___________________________________________________________ 64
Printing a Test Print Image _______________________________________________________________ 65
Selecting the About button _______________________________________________________________ 66
Selecting the Toolbox button _____________________________________________________________ 66
Using the Device Options tab _______________________________________________________________ 67
Detecting Supplies at Print Time Function ___________________________________________________ 68
Adjusting the Ribbon Type _______________________________________________________________ 69
Adjusting the Film Type __________________________________________________________________ 70
Using the Dual Sided Group Functions ______________________________________________________ 70
Using the Dual Sided - Print Both Sides option ________________________________________________ 71
Using the Print Both Sides - Split 1 Set of Ribbon Panels option __________________________________ 71
Using the Print Both Sides - Print Back Image on Front of Card option _____________________________ 72
Using the Dual Sided - Print Back Side Only option ____________________________________________ 72
Using the Print Quality___________________________________________________________________ 73
Using the Options Group _________________________________________________________________ 74
Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options __________________________ 74
Using the Disable Printing option __________________________________________________________ 75
Using the Dual Pass and Invert F-Panel Image options _________________________________________ 76
Using the Secure Resin Erase _____________________________________________________________ 76
Using the Encrypt Job Data _______________________________________________________________ 77
Using the Use Substitute Panel Data________________________________________________________ 77
Using the Image Color tab __________________________________________________________________ 79
Using the Image Quality – Color Matching dropdown __________________________________________ 80
Adjusting for the Resin Dither _____________________________________________________________ 82
Using the Advanced Image Color window ___________________________________________________ 83
Using the Image Transfer tab ________________________________________________________________ 86
Adjusting the Image Position controls ______________________________________________________ 87
Adjusting the Transfer Dwell Time and Temperature __________________________________________ 89
Using the Flattener Settings ______________________________________________________________ 90
Using the Default button _________________________________________________________________ 91
Using the Magnetic Encoding tab ____________________________________________________________ 92
Using the Encoding Mode dropdown list ____________________________________________________ 93
Selecting the Coercivity/Magnetic Track ____________________________________________________ 95
Reviewing the Shift Data Left Function ______________________________________________________ 96
Using the Character Size buttons __________________________________________________________ 96
Using the ASCII Offset dropdown list _______________________________________________________ 97
Using the Bit Density dropdown list ________________________________________________________ 97
Using the LRC Generation dropdown list ____________________________________________________ 98
Using the Character Parity Mode dropdown list ______________________________________________ 99
Reviewing the ISO Track Locations ________________________________________________________ 100
Sending the Track Information ___________________________________________________________ 101