HID FARGO HDP8500 User Guide - Manual (Page 146)

© 2012 HID Global Corporation. All rights reserved.
146
HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1
Step Procedure
10 Follow the same instruction as above for the back side of the card.
11 a. Save this template using the Save tab.
b. Close the Workbench. (Note: Any Software program file printed with the
YMCFK ribbon installed into the printer will print this design with the F
panel of the ribbon. It will print the same file each time unless you recreate
a new template.)
Step Procedure
12 Set the ribbon for YMCFK in the Printing Preferences. (Note: The Auto
Detect button may also be used. The F panel ribbon must be installed for this
process to work.)
13 Check Dual Pass if you would like to print the F panel on a separate panel of
HDP film from the YMC image. (Note: It is recommended that the user use
the default “Dual Pass” option if the fluorescent image is used in places where
other dye is used or any time the “Invert F panel Image” option is selected)
14 Check Invert F-Panel Image to create a negative of the fluorescent image.
(Note:
This may improve the look of the person‟s image if used for the Logo.)