HID FARGO HDP8500 User Guide User Manual

Page 173

173

HDP8500 Industrial Card Printer/Encoder User Guide L001617 rev 1.1

Printer's LCD display.

Card Jam

A Card has become
jammed in the Printer.

f. Open the Printer's Front Cover

and remove the Print Ribbon
and Film Cartridges.

g. Clear any cards in the printer by

using the Forward and/or Back
Buttons located on the printer‟s
LCD display.

h. Re-insert the Ribbon and close

the Printer‟s Front Cover.

i. Press the Resume button

located on the Printer's LCD
display to continue printing.

j. To Cancel the print, press the

Cancel Print button from the
Driver's display dialog and the
Cancel button located on the
Printer's LCD display.

Card Jam (Encoder)

A Card has become
jammed in the Printer's
Encoding station.

Open the Printer‟s Front Cover
and remove the Print Ribbon.

b. Open the Printer's Flipping

Module Cover.

c. Clear any cards in the Encoding

Module by using the Forward
and/or Back buttons located on
the Printer's LCD display.

d. Re-insert the Print Ribbon and

close the Printer‟s Front Cover.

e. Press the Resume button

located on the Printer's LCD
display to continue printing.

f. To cancel the print, press the

Cancel Print button from the
Driver's display dialog or the
Cancel button located on the
Printer's LCD display.

Card Jam (Flipper)

A Card has become
jammed in the Printer's
Flipper Table.

Open the Printer‟s Front Cover
and the Flipper Module Cover.

b. Clear any cards in the Flipper

Table by using the Forward
and/or Back buttons located on
the Printer's LCD display.