HID DTC1250e/DTC1000Me/DTC4250e User Guide - Manual (Page 20)

DTC1000Me/DTC1250e/DTC4250e Card Printer User Guide, PLT-01668, Rev 1.1
Page 20 April 2014
2.3 Installing the Print Ribbon Cartridge
FARGO Direct-to-Card Printers require highly specialized supplies to function properly.
The FARGO DTC1000Me, DTC1250e, and DTC4250e Card Printers use a one piece, disposable
ribbon cartridge system.
To maximize printer durability, reliability and printed card quality, you must use only FARGO-
certified supplies.
For this reason, your FARGO warranty is void, where not prohibited by law, if you use non-FARGO-
certified supplies.
Printer cleaning is recommended with each ribbon change to ensure quality printed cards.
Resin-only print ribbons consist of a continuous roll of a single resin color. No protective overlay
panel (O) is provided because resin images do not require the protection of an overlay.
2.3.1 Installing the Ribbon
Step Procedure
1 Pull open front cover.
2 Insert the print ribbon cartridge into the printer.
DTC1250e/DTC1000Me
DTC4250e with Flipper Module
3
Close the front cover.
DTC1250e/DTC1000Me DTC4250e with Flipper Module