HID DTC1000/4000/4500 Ethernet User Guide - Manual (Page 41)

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
41
Step Procedure
6 Select the Upgrade button to start the Firmware upload.
7 Printer Reboots automatically.
Using the Reboot pages
Rebooting the Printer restarts only the Ethernet Print Server.
Rebooting the Ethernet Server
The Reboot page allows the User to restart the Ethernet Print Server.
Step Procedure
1 Select the Administration link.
2 Log in as a root User (using the password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully
logged in.)
3 Select the Reboot link.