HID DTC1000/4000/4500 Ethernet User Guide - Manual (Page 36)

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
36
4 Enter a valid IP address or domain name.
5 Select Submit.
6 Log in as a root User if you are so prompted. (Note: Any change of a
setting will only be accepted after you have successfully logged in.)
Specifying TCP Event logging
Follow this procedure to send logging messages to a pre-existing IP connection made
on the TCP port.
Step Procedure
1 Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2).