HID DTC1000/4000/4500 Ethernet User Guide - Manual (Page 22)

DTC1000/1000M/4000/4500 Ethernet User Guide – Installation Guide L001411
(Rev.1.1)
22
Configuring the Network Settings
The procedures needed to configure the network settings are presented in this section.
Accessing the Network Settings page
The Network page displays the current network settings and allows the User to change
the settings.
Step Procedure
1 Select the Network link from any web page of the Printer.
Reviewing the Interface
The Interface display indicates the network speed supported by the Printer.
Reviewing the Current Settings
The Current Settings page section displays the current active network settings for the
Printer.

These are also labeled as Dynamic if they were provided by DHCP or Static if they
came from the Stored Settings.