Maintenance, Deliming - bcp only – Blodgett BLCP User Manual
Page 52

50
Maintenance
Deliming - BCP only
The control keeps track of boiler usage between deliming.
When the oven has reached 95% of the time the control
warns the operator that the oven needs to be delimed.
This is a warning only, the oven can be used all day be-
fore deliming.
Deliming the oven
1. Be sure the container delivering the deliming agent
to the appliance is full. Be sure to use a non-diluted
deliming agent.
2. From the MAIN Menu, select the SERVICE key.
3. The control displays the SERVICE menu. Press the
DELIME DIAGNOSIS key on the right of the control.
4. The control displays the Delime Diagnosis screen.
Press the START DELIMING key on the right side of
the control.
5. The remainder of the process is automatic. The con-
trol displays the deliming steps as they occur.
NOTE: The oven can be delimed at any time.
Figure 36
Work menu
service menu
main menu
Delime Diagnosis screen
Press to go to
MAIN Menu
Press to enter
DELIME Menu
Press to go
to SERVICE
Menu
Press to start
deliming
process