Blodgett BLCP - Manual (Page 34)

32
Operation
Programming a Product
4. The Edit Program screen is displayed. This is the main
screen for creating and editing product programs.
naming or Renaming the Product Program
5. Press the Change Text key on the Edit Program
screen. The ENTER TEXT screen is displayed.
NOTE: Skip this step if you are editing an existing
program and do not need to change the
name.
6. Use the keys on the right and left of the screen to
enter a new name, or edit an existing product name.
below for details.
Press the green arrow key on the top right at any time
to cancel the edit and return to the EDIT PROGRAM
screen without saving your changes.
7. Press the OK key to save your changes. The display
return to the EDIT PROGRAM screen.
Figure 23
edit Program screen
edit Text screen
Press to cancel
Press to move cursor to the left
Press to selects next letter to the left
Press to move quickly to the lef
Press to select upper or lower case letter
Press to erase letter to the left
Press to
save name
Press to move
cursor to the right
Press to select next
letter to the right
Press to move
quickly to the right
Press to write a
letter in a red box