Blodgett BLCP - Manual (Page 28)

26
Operation
Core Probe Cooking
ACTive CoRe PRoBe CookinG
In the active mode, the core probe will notify you when the
product has reached the desired pull temperature. The
cook temperature is constant in the active mode.
1. Follow steps 1-6 on the page 25 to enter the core
probe cooking screens.
2. Use the keys on the left of the display to set the de-
sired core probe pull temperature. The core probe set
temperature is displayed in red.
3. Press the OK key to save the save the desired core
probe temperature.
4. Press the START/STOP key to start the core probe
cook cycle.
5. When the product has reached the desired core tem-
perature an alarm sounds and the display reads EN-
TER. Press the key next to ENTER, or open the door,
to silence the alarm.
6. Unplug the core probe and remove the product.
CookinG WiTH TWo CoRe PRoBes
When one of the probes reaches the desired core tem-
perature, an alarm sounds and a ENTER appears in the
display.
1. Press the key next to ENTER, or open the door, to
silence the alarm.
2. Take out the product and close the door.
3. The oven continues until the second probe reaches
the desired core temperature.
Figure 17
set Core Probe screen
Press this key to cancel
and return to WORK Menu
Press this key to raise
probe temp
Press this key to
lower probe temp
Press this key to save
your settings
Press this key to start the
core probe cook cycle