Blodgett BLCP - Manual (Page 32)

30
Operation
Programmed Cooking
5. Press the key next to the desired product program.
The display changes to the Edit Step screen. This
screen gives the operator the chance to change the
cook temperature, time, fan speed, vent and humid-
ity level (if applicable) for any stage of the program.
Changes made will be for the current bake only. The
program will not be changed for future bakes.
6. Press the START/STOP key to initiate the pro-
grammed cook cycle. The display shows the Program
Cooking screen.
NOTE: If the first stage of the program is a preheat,
an alarm sounds at the end of the stage and
a message appears notifying you that the
preheat is complete. Press the key next to
ENTER to silence the alarm and proceed to
stage 2.
7. The square around the mode for the current stage will
flash and the display counts down the cook time.
8. When there is one minute left in each stage, the com-
puter counts down from 59 seconds.
9. When the time has expired on the final stage, an
alarm sounds and a message appears notifying you
that the program is complete. Press the key to the left
of ENTER, or open the door, to silence the alarm.
10. The control returns to the WORK Menu.
Figure 21
edit step screen Program Cooking screen
Press to
return to
settings for
the previous
stage
Press to move to
settings for the next
stage
Press to start
product program
The yellow box indicated the current
stage in edit mode.