Blodgett BG2136 - Manual

BLODGETT OVEN COMPANY
www.blodgett.com
1400 Toastmaster Drive, Elgin, IL USA 60120
Phone: (847) 741-3300 • Fax: (847) 741-0015
MODEL BG2136
Gas Conveyor Oven
EXTERIOR CONSTRUCTION
Stainless steel front, top, sides, and interior
Fully insulated on bottom, top, front, and rear
Easy serviceable access to all components
Front and top surfaces are cool to the touch
Full drop down front window
Aluminized finished steel back
INTERIOR CONSTRUCTION
Stainless steel outer (finger) plates
18” (457mm) wide stainless steel wire mesh conveyor belt
36” (915mm) long bake chamber
Two blower inlets in the plenum for forced air circulation supplying top and bot-
tom air flow
Standard or Customer specific finger set that allows control of 8 heat zones
inside the bake chamber. Finger set consists of manifolds, inner plates, outer
plates and blank plate(s).
OPERATION
Solid state digital controls to display set point and actual bake chamber tem-
perature(s) as well as bake time.
Maximum Temperature is 550 degrees F (one degree increment)
Modulating gas valve maintains accurate bake chamber temperature
Electronic spark ignition control system
Atmospheric type burner
Internal gas pressure regulator
3 – 30 minute bake time (one second increment)
Product clearance 3 ½” (889mm)
Heat transferred through forced directed hot air impingement
Open vented baking chamber
Two blower cooling fans
Easy to clean – no tools required
Project
Item No.
Quantity
Blodgett gas fired conveyor oven with 18” (457mm) wide conveyor belt and
36” (915mm) long baking zone length. Single, double or triple stack models.
All data is shown per oven section, unless otherwise indicated.
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
High speed conveyor (1-10 minute bake time)
76” (1930mm) long conveyor in lieu of standard 60”
(1524) long conveyor
9” (228mm) Twin stainless steel wire mesh conveyor
belt with individually adjustable bake time settings
Stacking kit to properly stack a BG2136 on top of an
existing SG2136G
One year additional extended warranty*
BG2136
STANDARD FEATURES
Energy reduction system provides an efficient heating
system that improves cooking results and saves energy
Impingement deluxe dual air return that improves cook-
ing results and saves energy
Solid state controls
Temperature controller’s built in auto tune feature
improves overall conveyor oven performance
Microprocessor-controlled conveyor speed with motor
feedback
Large front loading door with window and stainless steel
handle
Portable stand (single, double, triple stack ovens)
Stackable to three high
Stainless steel under shelf on single and double stack
ovens
Removable folding conveyor frame and belt assembly
Removable 8” (203mm) shelf extension (entrance end)
Adjustable conveyor belt tension
Field reversible conveyor belt direction
Product stop (exit end)
¾” by 48” coated gas hose, restraint cable, and manual
on/off gas valve
6’ cord with NEMA L6-20P plug (shipped loose)
One year parts and labor warranty
Start Up by our Authorized Service Provider to activate
the warranty (USA and Canada only)*
* For all international markets, contact your local distributor.